Shop
Bombers Bit, Fulmer Loose Ring Elliptical, 12mm
$190.00Elliptical in popular bar bit cheek piece. Good for young horses to assist in direction and pressure across the tongue to gain collection and head down.
Sold individually.
The New England “Man” Satchel, Weatherproof Suede
$190.00Keep all your valuables on your person and weatherproof with this stylish over the shoulder bag for all bike riders and travellers. Finished in a weatherproof suede and traditional green canvas.
- Weatherproof Suede and Traditional 12oz canvas
- Handmade at our workshop in Queensland, Australia
- Top flap tucks into canvas strap to hold down
- Internal and external zip pocket on back panel
- Sold individually
A larger version of this bag is also available: The Biker
Helmet Protective, White
$190.00Full face mask. Inside padded and fully adjustable.
Sold individually.
Bombers Bit, Loose Ring Tube Buster Roller
$190.00The Loose Ring Tube cheekpieces lies flat against the horse’s face giving a more solid feel against the side of the face, while preventing lip pinching and the bit being pulled through the mouth. The mouthpiece is quite fixed in the mouth and concentrates pressure on the bars. However the loose rings allow for a quick release.
The Buster Roller link in the middle is shortened to 40mm which increases bar and tongue pressure making the bit sharper than conventional link bits. The increased pressure on the bar will lift the head and the roller will increase pressure on the tongue bringing the chin in. Best suited for a horse with a low head carriage and one which leans on the bit.
- Distance between rings – 130mm.
Bombers Bit cheek pieces are available with any mouth piece. For a different mouth piece to suit a particular cheek piece please contact us and we will be able to order the bit you require.
- Sold individually.
Bombers Bit, Williams, Control Plate 45
$190.00The Williams cheekpiece allows for multiple rein positions. When connected to the main ring the bit acts as a loose ring, and when connected to the bottom ring it promotes pole flexion by creating more positive poll pressure. The Williams cheekpiece helps to prevent drifting.
The Bombers Control Plate is set at 45° to follow the contour of the horses tongue. Consequently, a horse who uses his tongue as a means of pushing against the bit and therefore taking control, will draw back and tuck his chin in, coming back to a better point of control. This differs from a Dr Bristol which sits horizontally with the edge of the plate on the tongue.
Distance between rings: 130mm.
Bombers Bit cheek pieces are available with any mouth piece. For a different mouth piece to suit a particular cheek piece please contact us and we will be able to order the bit you require.
- Sold individually.
Axe, Hultafors, Yankee Felling, 1.5kg head
$185.00An axe suitable for small-scale felling, made from blasted and clear-lacquered ironwork. The shaft is curved and made from hickory.
- Wooden handle from American hickory, treated with linseed oil
- The axe head is hand-forged and made from Swedish axe steel
- The steel is struck several times, increasing its density and thereby the durability of the axe
- Has a clear tempered zone within which the axe can be sharpened whilst not detracting from the strength of the edge
- Sold individually
Dimensions:
Length of handle: 28 ¾”
Total Weight: 2300gms
Head Weight: 1500gms
Bag, Saddle Roll, Weatherproof Suede with Zip
$185.00The weatherproof suede Saddle Roll is great for carrying an oilskin coat or other personal gear. It clips onto the back of your saddle. Opens with a zip across the back for easy access.
- Weatherproof Suede Leather
- Handmade at our workshop in Queensland, Australia
- Size: Dia: 6 1/2” (16.5cm), L: 17” (42.5cm)
- Stainless Steel trigger clips to attach to saddle
- Sold individually
Leather Diary and Notebook Holder
$139.00 – $185.00Keep your diary and notebook in good condition in Kent Saddlery’s Leather Diary and Notebook Cover. It has a facility to carry business cards and a pen, made to last. Fastens with 2 antique brass press studs.
- Solid Leather
- Handmade at our workshop in Queensland, Australia
- Size: A4 H: 12 1/2″ (32cm) W: 9″ (23cm) when closed
- Size: A5 H: 9” (23cm) x W: 7” (18cm) when closed
- With or without a Day-to-a-page Diary
- Includes a Spirex Notebook
- Smooth Out Leather
- Sold individually.
Customisation Options
For a personalised touch you can also purchase a brass plate with engraving of your choice which can be riveted onto your diary and notebook cover. Order a brass plate >
Roll Pouch, soft leather, for 5 Butchers Knives and Steel
$185.00Keep all your knives and steel protected and ready to use in this handy roll to keep in your vehicle. The Knives & Steel are not included in the price of the pouch.
- Durable Soft Split Chrome Leather
- Handmade at our workshop in Queensland, Australia
- Dimensions: H: 46cm (18″), W: 46cm (18″)
- Machine Stitched with poly braid thread
- Brass Buckles and Rivets
- 1/2” (12.5mm) Leather Straps
- For 5 Knives and 1 Steel
- Sold individually
Bombers Bit, Fulmer Loose Ring, Control Plate
$185.00The Fulmer cheekpiece, has the same effect as the traditional Eggbutt and prevents pinching on the sides of the mouth. The extended pins above and below the bit, prevent the bit being pulled through the mouth and have the effect of guiding the horses head which is great for schooling and training purposes.
The Loose Rings make the bit less fixed in the mouth, which encourages mouthing and acceptance of the bit, while retaining the turning advantages of the full cheek.
The Bombers Control Plate is set at 45° to follow the contour of the horses tongue. Consequently, a horse who uses his tongue as a means of pushing against the bit and therefore taking control, will draw back and tuck his chin in, coming back to a better point of control for the rider/trainer. This differs from a Dr Bristol which sits horizontally with the edge of the plate on the tongue.
- Distance between rings – 130mm.
Bombers Bit cheek pieces are available with any mouth piece. For a different mouth piece to suit a particular cheek piece please contact us and we will be able to order the bit you require.
- Sold individually.
Bombers Bit, Kimberley Dee Colin Miles
$185.00The Kimberley Dee cheekpiece prevents lip pinching and gives a solid feel against the side of the face. It also prevents the bit being pulled through the mouth. The release is slower than a Loose Ring and also introduces some poll pressure.
The Colin Miles is a great schooling bit with a 55mm centre piece creating greater tongue pressure and reducing bar pressure. The rings give the horse something to play with and help to keep the horses attention on the bit.
This particular joint exerts more pressure than the Control Plate or Elliptical.
- Distance between rings – 130mm.
Bombers Bit cheek pieces are available with any mouth piece. For a different mouth piece to suit a particular cheek piece please contact us and we will be able to order the bit you require.
- Sold individually.
Bombers Bit, Fulmer Loose Ring Snaffle
$185.00The Fulmer cheekpiece, has the same effect as the traditional Eggbutt and prevents pinching on the sides of the mouth. The extended pins above and below the bit, prevent the bit being pulled through the mouth and have the effect of guiding the horses head which is great for schooling and training purposes.
The Loose Rings make the bit less fixed in the mouth which encourages mouthing and acceptance of the bit, while retaining the turning advantages of the full cheek.
The Bombers Snaffle is a popular bit due to the curved mouthpiece which distributes pressure more evenly over tongue and bars. With the offset centre link it reduces the nutcracker action and pressure points on the tongue.
- Distance between rings – 130mm.
Bombers Bit cheek pieces are available with any mouth piece. For a different mouth piece to suit a particular cheek piece please contact us and we will be able to order the bit you require.
- Sold individually.
Tool Roll, Soft Leather, Farrier’s
$180.00Height 20″ (50cm), Width 26″ (65cm). Split Chrome leather with stainless steel buckles.
Napier Downs, Kimberley, Western Australia – Farrier’s Gear
When Kent Saddlery visited Napier Downs, in the Kimberley,Western Australia in 2012, it proved to be the opportune time to purchase Farriers Gear. Boof Evans is a keen horseman, and encourages the workers to have a personal roll of quality farrier tools as part of their work gear. Horses are used extensively for stock work on Napier Downs Station, and each member of the stock camp has the responsibility to keep allocated horses in top condition. Against the dramatic backdrop of the Napier Range, Boof Evans, (behind horse) and workers Quinton Kammann (left) and David Peskett begin the day by putting the farrier tools, purchased the night before, to good use.
Sold individually.
Army Water Bottle and Quart Pot Combination Pouch, Solid Leather
$178.00The Army Water Bottle and Quart Pot Combination Pouch is great if you want a nice hot cuppa when out on the trail. It will take: one army water bottle and a quart pot or two water bottles or one 2L soft drink bottle also fits well in this pouch.
- Solid Leather
- Handmade at our workshop in Queensland, Australia • Pouch can be fitted to either side of the saddle
- Brass or Stainless Steel Buckles
- If you don’t mind receiving either buckle type, please select “Any Fitting” as your option.
- Army Water Bottle & Quart Pot not included – available separately
- Sold individually
Handbag, Henk Berg, Solid Leather, Pia 27x24cm
$178.00The Henk Berg design philosophy comes from Henks belief that “in a throwaway society individuals are searching for durability and quality. Our bags are constructed by hand and designed to meet high standards of aesthetics, durability and functionality. Size, shape, pockets and straps are carefully considered to provide maximum efficiency, comfort and convenience.”
Sold individually.
Dinner Hobbles, Solid Leather
$172.00 – $178.00The Dinner Hobble or figure eight hobble, a common style of hobble that is often worn as a belt, used as a neck strap, lunch-time hobble, or tying up a “micky” bull. This hobble is made in three pieces with two rings, plus a buckle fastening. Kent Saddlery manufacture their leather dinner hobbles using 1 layer of solid leather, terylene webbing and an under layer of soft leather.
- Solid Leather and Terylene Webbing Double machine Stitched with poly braided thread
- Handmade at our workshop in Queensland, Australia
- Soft leather Lined for comfort
- Choice of Stainless Steel or Brass Buckles and fittings
- Size: Available in 1 1/4″ and 1 1/2″ wide straps, L: 52″ (132cm)
- If you don’t mind receiving either buckle type, please select “Any Fitting” as your option.
- Sold individually
Didgeridoonas Picnic Port
$175.95Kent Saddlery carry a range of Didgeridoonas products.
The Picnic Port is the ideal hamper for big events or family picnics. The Picnic Port will keep things cold (or hot) for hours. Designed with a secure fitting, padded lid, which protects the contents. Inside, an extra wool pad gives another layer of insulation and divides the contents to prevent breakages. The Picnic Port features a solid base and strong straps, held together with leather fastener for easy carrying.
- Oilskin fabric
- Size: (w) 33.5cm (13.25″), (d) 29cm (11.5″), (h) 21cm (8.25″)
- Capacity: 30 litres
- Sold individually
Stockmans Hobble Style Belt, Solid Leather, with Brass Horseshoe Buckle, 2 Rings and Pouch for Pocket Knife
$149.00 – $175.00Tired of buying belts that say genuine leather only to find out a month down the track that your belt is falling apart? At Kent Saddlery we only use solid leather so your belt will go the extra mile. This belt comes with two rings and a pocket knife pouch which is hand moulded and hand sewn with woven poly-braid thread. The benefit of a ring in a belt is that when you have a pouch sewn on you can feed the end of the belt strap through the ring out of the way.
- Solid Leather
- Hand sewn with poly-braid thread the traditional way along the belt for strength
- Handmade at our workshop in Queensland, Australia
- Size: Jeans size in inches or centimetres
- Width: Available in 1 ¼” (32mm) or 1 ½” (38mm)
- Buckles: Brass Horseshoe Buckle
- Ring: Two Brass Rings
- Pocket Knife Pouch Size (availability subject to belt width):
- Large suits 4” three blade knives
- Medium suits 3 ¼” three blade knives
- Small suits 2 ¾” three blade knives
- Specific for Taylor Eye 2 Blade Pocket Knife
- Leatherman Pouch Size (available on ½” belts)
- Large suits Core, Supertool, Surge
- Medium suits Blast, Fuse, Kick, Pulse, Rebar, REV, Sidekick, Skeletool, Wave, Wingman
- Specific for Charge Titanium
- Belts cut and holes punched to size
- Sold individually
Stockmans Hobble Style Belt, Solid Leather, with Brass Roller Buckle, 2 Rings and Pouch for Pocket Knife
$149.00 – $175.00Tired of buying belts that say genuine leather only to find out a month down the track that your belt is falling apart? At Kent Saddlery we only use solid leather so your belt will go the extra mile. This belt comes with two rings and a pocket knife pouch which is hand moulded and hand sewn with woven poly-braid thread. The benefit of a ring in a belt is that when you have a pouch sewn on you can feed the end of the belt strap through the ring out of the way.
- Solid Leather
- Hand sewn with poly-braid thread the traditional way along the belt for strength
- Handmade at our workshop in Queensland, Australia
- Size: Jeans size in inches or centimetres
- Width: Available in 1 ¼” (32mm) or 1 ½” (38mm)
- Buckles: Brass Roller Buckle
- Ring: Two Brass Rings
- Pocket Knife Pouch Size (availability subject to belt width):
- Large suits 4” three blade knives
- Medium suits 3 ¼” three blade knives
- Small suits 2 ¾” three blade knives
- Specific for Taylor Eye 2 Blade Pocket Knife
- Leatherman Pouch Size (available on ½” belts)
- Large suits Core, Supertool, Surge
- Medium suits Blast, Fuse, Kick, Pulse, Rebar, REV, Sidekick, Skeletool, Wave, Wingman
- Specific for Charge Titanium
- Belts cut and holes punched to size
- Sold individually
Stockmans Hobble Style Belt, Solid Leather, with Stainless Steel Roller Buckle, 2 Rings and Pouch for Pocket Knife
$149.00 – $175.00Tired of buying belts that say genuine leather only to find out a month down the track that your belt is falling apart? At Kent Saddlery we only use solid leather so your belt will go the extra mile. This belt comes with two rings and a pocket knife pouch which is hand moulded and hand sewn with woven poly-braid thread. The benefit of a ring in a belt is that when you have a pouch sewn on you can feed the end of the belt strap through the ring out of the way.
- Solid Leather
- Hand sewn with poly-braid thread the traditional way along the belt for strength
- Handmade at our workshop in Queensland, Australia
- Size: Jeans size in inches or centimetres
- Width: Available in 1 ¼” (32mm) or 1 ½” (38mm)
- Buckles: Stainless Steel Roller Buckle
- Ring: Two Stainless Steel Rings
- Pocket Knife Pouch Size (availability subject to belt width):
- Large suits 4” three blade knives
- Medium suits 3 ¼” three blade knives
- Small suits 2 ¾” three blade knives
- Specific for Taylor Eye 2 Blade Pocket Knife
- Leatherman Pouch Size (available on ½” belts)
- Large suits Core, Supertool, Surge
- Medium suits Blast, Fuse, Kick, Pulse, Rebar, REV, Sidekick, Skeletool, Wave, Wingman
- Specific for Charge Titanium
- Belts cut and holes punched to size
- Sold individually
Stockmans Hobble Style Belt, Solid Leather, with Brass Swage Buckle, 2 Rings and Pouch for Pocket Knife
$149.00 – $175.00Tired of buying belts that say genuine leather only to find out a month down the track that your belt is falling apart? At Kent Saddlery we only use solid leather so your belt will go the extra mile. This belt comes with two rings and a pocket knife pouch which is hand moulded and hand sewn with woven poly-braid thread. The benefit of a ring in a belt is that when you have a pouch sewn on you can feed the end of the belt strap through the ring out of the way.
- Solid Leather
- Hand sewn with poly-braid thread the traditional way along the belt for strength
- Handmade at our workshop in Queensland, Australia
- Size: Jeans size in inches or centimetres
- Width: Available in 1 ¼” (32mm) or 1 ½” (38mm)
- Buckles: Brass Swage Buckle
- Ring: Two Brass Rings
- Pocket Knife Pouch Size (availability subject to belt width):
- Large suits 4” three blade knives
- Medium suits 3 ¼” three blade knives
- Small suits 2 ¾” three blade knives
- Specific for Taylor Eye 2 Blade Pocket Knife
- Leatherman Pouch Size (available on ½” belts)
- Large suits Core, Supertool, Surge
- Medium suits Blast, Fuse, Kick, Pulse, Rebar, REV, Sidekick, Skeletool, Wave, Wingman
- Specific for Charge Titanium
- Belts cut and holes punched to size
- Sold individually
Stockmans Hobble Style Belt, Solid Leather, with Stainless Steel Swage Buckle, 2 Rings and Pouch for Pocket Knife
$149.00 – $175.00Tired of buying belts that say genuine leather only to find out a month down the track that your belt is falling apart? At Kent Saddlery we only use solid leather so your belt will go the extra mile. This belt comes with two rings and a pocket knife pouch which is hand moulded and hand sewn with woven poly-braid thread. The benefit of a ring in a belt is that when you have a pouch sewn on you can feed the end of the belt strap through the ring out of the way.
- Solid Leather
- Hand sewn with poly-braid thread the traditional way along the belt for strength
- Handmade at our workshop in Queensland, Australia
- Size: Jeans size in inches or centimetres
- Width: Available in 1 ¼” (32mm) or 1 ½” (38mm)
- Buckles: Stainless Steel Swage Buckle
- Ring: Two Stainless Steel Rings
- Pocket Knife Pouch Size (availability subject to belt width):
- Large suits 4” three blade knives
- Medium suits 3 ¼” three blade knives
- Small suits 2 ¾” three blade knives
- Specific for Taylor Eye 2 Blade Pocket Knife
- Leatherman Pouch Size (available on ½” belts)
- Large suits Core, Supertool, Surge
- Medium suits Blast, Fuse, Kick, Pulse, Rebar, REV, Sidekick, Skeletool, Wave, Wingman
- Specific for Charge Titanium
- Belts cut and holes punched to size
- Sold individually
Leatherman Tool, Skeletool
$175.00A compact, ultra-light 5 oz. multi-tool with a combo knife, bit driver, pliers and more.
01 – Needlenose Pliers
02 – Regular Pliers
03 – Hard-wire Cutters
04 – Wire Cutters
05 – 420HC Combo Knife
06 – Carabiner/Bottle Opener
07 – Large Bit Driver
Comes with Leatherman’s outstanding 25-year warranty!
Ringers Filing Case, Solid Leather
$175.00During a visit to Canobie Station, QLDs Gulf, Heidi Morris showed us a tough, practical, filing bag, used by son Clayton, who was working at Marion Downs Station, Boulia, QLD. It helped to make Heidi’s job as Clayton’s bookkeeper that much easier! We’ve developed a similar tough, go anywhere leather briefcase. Invoices… everything can go in the ringers filing case.
- Solid leather
- Handmade at our workshop in Queensland, Australia
- Size: W: 15 1/2” (39.5cm), H: 12” (30.5cm)
- Smooth Out Leather
- This quality leather document folder can be personalised with an engraved brass plate
- Sold individually
Customisation Options
For a personalised touch you can also purchase a brass plate with engraving of your choice which can be riveted onto your filing case. Order a brass plate >
Bombers Bit, Kimberley Dee, Snaffle
$175.00The Kimberley Dee cheekpiece prevents pinching of the lips and gives a solid feel against the side of the face. It also prevents the bit being pulled through the mouth. The release is slower than a Loose Ring and introduces some poll pressure.
The Bombers Snaffle mouthpiece is popular due to the curved mouthpiece which distributes pressure more evenly over tongue and bars. With the offset centre link it will reduce nutcracker action and pressure points on the tongue.
- Distance between rings – 130mm.
Bombers Bit cheek pieces are available with any mouth piece. For a different mouth piece to suit a particular cheek piece please contact us and we will be able to order the bit you require.
- Sold individually.
Bombers Bit, Loose Ring Tube, Snaffle
$175.00The Loose Ring allows for immediate release and relief for the tongue and bar pressure. The bit immediately resets to a neutral position in the horse’s mouth. The Loose Ring Tube cheekpieces lie flat against the horse’s face giving a more solid feel against the side of the face, while preventing pinching of the lips and the bit being pulled through the mouth. The mouthpiece is quite fixed in the mouth and concentrates pressure on the bars but the loose rings allow for a quick release.
The Bombers Snaffle is a popular bit due to the curved mouthpiece which distributes pressure more evenly over tongue and bars. With the offset centre link it reduces the nutcracker action and pressure points on the tongue.
- Distance between rings – 130m (5 1/8 inches)
Bombers Bit cheek pieces are available with any mouth piece. For a different mouth piece to suit a particular cheek piece please contact us and we will be able to order the bit you require.
- Sold individually.
Pocket Knife, Boker, Barlow Wood Folding Knife
$172.00Boker, of Solingen, Germany, is one of the worlds leading manufacturers and developers of premium knives since 1869. Made in Germany.
3 1/4 inch (8.5cm) when closed.
Sold individually.
Motorbike Saddle Bag, Single, PVC
$172.00Always storing stuff in your pockets or tying bags to your bike while you’re out working or on the road? Kent Saddlery manufacture a light weight water resistant PVC single saddle bag for your motorbike.
- PVC 560gsm
- Handmade at our workshop in Queensland, Australia
- Size: Each bag- H: 10″ (25.5cm), W: 13″ (33cm), D: 5 1/2″ (14cm).
- Stainless steel fittings
- Available in a range of colours
- Sold individually
Leatherman Tool, Sidekick
$172.00A great choice for first-time users, this handy pocket-sized tool will quickly become your very own Sidekick.
Tools
- Spring-action Needlenose Pliers
- Spring-action Regular Pliers
- Spring-action Wire Cutters
- Wire Stripper
- 420HC Knife
- 420HC Serrated Knife
- Saw
- Ruler (1.5 in | 3.8 cm)
- Can Opener
- Bottle Opener
- Wood/Metal File
- Phillips Screwdriver
- Medium Screwdriver
- Small Screwdriver
Sold individually.
Comes with Leatherman’s outstanding 25-year warranty!
Leather Reins, Cutting, Double Layer Stitched
$170.005/8″ (15mm) All leather reins are 2 metres (6’7″) or more long.
Sold in a pair.
Roll Pouch, soft leather, for 3 Butchers Knives and Steel
$170.00Keep all your knives and steel protected and ready to use in this handy roll to keep in your vehicle. The Knives & Steel are not included in the price of the pouch.
- Durable Soft Split Chrome Leather
- Handmade at our workshop in Queensland, Australia
- Dimensions: H: 46cm (18″), W: 34cm (13.5″)
- Machine Stitched with poly braid thread
- Brass Buckles and Rivets
- 1/2” (12.5mm) Leather Straps
- For 3 Knives and 1 Steel
- Sold individually
Executive Leather Diary Cover, A4, with Diary
$166.00Keep your diary in good condition in Kent Saddlery’s new Executive Leather Diary Cover. Look great as you walk into those meetings with this stylish new edition diary cover from Kent Saddlery, made to last.
- Solid Leather
- Handmade at our workshop in Queensland, Australia
- Size: A4 H: 12 1/2″ (32cm) W: 9″ (23cm) when closed
- With a Day-to-a-page Diary
- Smooth Out Leather
- Sold individually
Leather Diary Holder
$128.00 – $166.00Keep your diary in good condition in Kent Saddlery’s Leather Diary Cover. It has a facility to carry business cards and a pen, made to last. Fastens with 2 antique brass press studs.
- Solid Leather
- Handmade at our workshop in Queensland, Australia
- Size: A4 H: 12 1/2″ (32cm) W: 9″ (23cm) when closed
- Size: A5 H: 9” (23cm) x W: 7” (18cm) when closed
- With or without a Day-to-a-page Diary
- Smooth Leather
- Sold individually.
Customisation Options
For a personalised touch you can also purchase a brass plate with engraving of your choice which can be riveted onto your diary cover. Order a brass plate >
Braces, Solid Leather with Trigger Clips – Combination Rear Clips
$165.00The new style solid leather braces made by Kent Saddlery, now with combination rear clips. They are strong, and will stand the test of time and everyday use.
- Premium Full Grain Leather
- Interchangeable rear clips give you the option of one or two rear trigger clips which can be easily swapped out via a press stud which is neatly covered by a small leather sleeve.
- Available in brass or stainless steel fitting
SIZE MEASUREMENTS
Measure from the front belt loop on your pants to the middle back belt loop.
X Short: 98cm – 106cm
Short: 107cm – 116cm
Medium: 117cm – 125cm
Long: 122cm – 131cm
X Long: 126cm – 137cm
2X Long: 133cm – 144cm
Sold individually.
Stirrup Straps, Solid Leather, Reinforced, 1 1/4″ with keeps
$165.00For 1 1/4″ stirrup irons.
Reinforced with webbing.
Stainless Steel Buckles.
One size fits all.
Sold in a pair.
Stirrup Irons, Four Bar
$165.00To suit 1 1/4″ to 2 1/2″ stirrup leathers. Stainless steel. Traditional iron modified for fender saddles. Fairly heavy.
Sold in a pair.
Leather Reins, Cutting, Herman Oak
$165.00- Made from top quality American Herman Oak leather
- 6-7mm thick, tapered to 10mm thick at the ends
- Very supple when oiled.
- All leather reins are 2 metres (8″) or more long.
- Sold in a pair.
Saddle Pad, Supa-Cool Neoprene
$162.0030″ x 31″ (75cm x 78cm). Available in a range of colours. Tough, perforated and practical, this western pad is very absorbent, breathes well and offers both coolness and comfort for horse and rider.
Sold individually.
Bombers Bit, Loose Ring, Happy Tongue, 14/10mm
$160.00The Loose Ring allows for immediate release and relief from tongue and bar pressure. The bit is immediately reset to a neutral position in the horse’s mouth. The Happy Tongue is a solid mouth piece. It is curved and ported to give tongue relief. The Happy Tongue would be a good place to start if your horse is:
- Shaking its head
- Sticking its tongue out
- Sucking its tongue back and as a result making an intermittent coughing noise
- Trying to put its tongue over the bit
- Going behind the bit to avoid the contact
- Snatching the reins forward and down
- Distance between rings – 125mm.(5 inches)
The rider will know immediately if this is the correct bit, as a horse with a sensitive tongue will finally begin to work into, and accept the contact. Changing the cheekpieces would then allow the rider to adjust the level of control.
Bombers Bit cheek pieces are available with any mouth piece. For a different mouth piece to suit a particular cheek piece please contact us and we will be able to order the bit you require.
- Sold individually
Bull Strap, Solid Leather, with Ring
$150.00 – $158.00The Bull Strap, often worn as a belt and used to secure cattle. This strap is made in two pieces with one ring, plus a buckle fastening. Kent Saddlery manufacture their leather Bull Straps using 1 layer of solid leather, terylene webbing and an under layer of soft leather.
- Solid Leather and Terylene Webbing Double machine Stitched with poly braided thread
- Handmade at our workshop in Queensland, Australia
- Soft leather Lined for comfort
- Stainless Steel fittings only
- Size: Available in 1 1/4″ and 1 1/2″ wide straps, L: 57 1/2″ (146cm)
- Sold individually
Pouch for YETI Water Bottle, Solid Leather, attaches to fit around back of saddle
$155.00Solid leather pouch for YETI Water Bottle, attaches to fit around the back of a saddle with 2 adjustments so you can fit either the 750ml (26oz) or the 1lt (36oz) water bottle.
Stainless Steel fittings.
Sold individually.
Leather Log Book Cover, A4
$155.00* 32cm (height) x 23cm (width) when closed;
* Available in Smooth Out Leather;
Sold individually.
Army Water Bottle Pouch, Solid Leather, to hang on saddle
$155.00This Water Bottle Pouch is designed to fit on either side of the saddle. Comes with a leather lace to hold the pouch close to the horse. An Army Water Bottle fits snugly into this pouch.
- Solid Leather
- Handmade at our workshop in Queensland, Australia
- Size: fits an army water bottle
- Leather tie down lace
- Brass or SS Buckles
- If you don’t mind receiving either buckle type, please select “Any Fitting” as your option.
- Sold individually